DLI INTERLIGHTING LED
High PAR Bi-Directional LED Light Between Your Plants! DLI Interlighting fixtures are designed to deliver high levels of photosynthetic photon flux (PPF) values with an optimal angle vertical light uniformity. The Interlighting modules are constructed in a slim water-proof design and suspended between the plant canopy rows with the easy-hang system.
A percentage of harvestable plant height can suffer from lack of light due to dense canopy foliage; which will result in fewer flowers. The DLI Interlighting system will provide High PAR PPF at an optimized coverage angle making sure the whole plant is activated by light; extensive trials have shown bigger leaves and flowers at the lower portions on the plant. The modules emit very little heat and require no active cooling minimizing leaf burn.
Instead of using inefficient ‘Unders’ lighting, try adding DLI Interlighting to your cultivation!
The DLI Interlighting systems Kit consist of: 1 x Driver & 2 x LED Modules (1 driver powers 2 LED modules).
Standard length: 4ft (1.2m)
Each module has LED’s on both sides and come as standard lengths of 4ft (120cm)
- Wide Input Voltage: 90 – 305V
- Power Consumption 96W
- Output: 250umol/s
- IP Rating Driver: IP 67
- IP Rating Light Engine: IP 65
- Expected Lifetime: >50000 hours
- Powercable: 9ft or 2.7m
How it works:
For a uniform plant a uniform pattern is required.
HPS or CDM only give the top leaves of the plants a certain amount of light and even with the best reflectors in the market, only the upper 40% of the plant canopy receives enough light for photosynthesis.
The lower 60% of the plant is living in its own shadow and the bushier the plant gets the less light the lower part of the plant receives. Interlighting is Greenhouse technology and a method that’s used in Nordic greenhouses because of lack of natural daylight, indoor cultivation has no natural daylight to supplement photosynthetic photon flux and will benefit greatly from this technology.
Model Number: DLI INTERLIGHTING LED